Skip to main content
This page helps you configure notification sounds and status LED Menu path: SETTINGS → Notification

​
🔔 Sound and Light Settings

🔇 Mute Buzzer

Turn notification sound off or onEnable this option to mute all sounds

💡 OFF LED

Turn status LED off or onEnable this option to turn off the LED

🔊 Test Buzzer

Preview each sound patternSelect a sound to hear it before deciding

✨ Test LED

Test the status LEDCheck if the LED works normally
The terms Mute and OFF mean “disabled,” so their wording may look opposite to the on-screen switch state

​
🎵 Available Sound Patterns for Testing

When you enter Test Buzzer, you’ll find these sounds:
  • Click - Short click sound
  • Soft Ping - Soft ping sound
  • Ready - Ready sound
  • Confirm - Confirmation sound
  • Success - Success sound
  • Flipper Chirp - Flipper’s signature sound
  • Mode Change - Mode change sound
  • Start Armed - Start operation sound
  • Stop Disarmed - Stop operation sound
  • Connected - Connection sound
  • Disconnected - Disconnection sound
  • Busy Locked - System busy sound
  • Denied - Access denied sound
  • Warning Soft - Soft warning
  • Warning Tactical - Severe warning
  • Error Normal - Normal error sound
  • Hard Fail - Severe failure sound
  • Low Battery - Low battery warning
  • Critical - Critical alert
  • Scan Tick - Tick sound during scanning
  • Capture Found - Data captured sound

​
💡 Usage Tips

Quiet environment: Enable Mute Buzzer to silence all soundsSave battery: Enable OFF LED to turn off the status lightTest before use: Use Test Buzzer and Test LED to verify the device works properly
🎬 Media to add: Demonstrate turning on/off Mute Buzzer, OFF LED, and testing sounds/lights

​
↩️ Back to Main

SETTINGS

Return to see other settings