> ## Documentation Index
> Fetch the complete documentation index at: https://c5tako.ziphers.space/llms.txt
> Use this file to discover all available pages before exploring further.

# SNIFFER

> View nearby BLE advertisements and device information.

View BLE devices advertising near C5TAKO™ and open the details for each device.

## 📊 BLE Monitor

```text theme={"theme":{"light":"github-light","dark":"dracula"}}
Bluetooth → SNIFFER → BLE Monitor
```

Use this view to see BLE advertisements detected by the device and assess how much BLE activity is present nearby.

1. Open `Bluetooth → SNIFFER → BLE Monitor`.
2. Wait for devices to appear on the display.
3. Hold the center button for about one second to stop.

## 🔎 Inspector

```text theme={"theme":{"light":"github-light","dark":"dracula"}}
Bluetooth → SNIFFER → Inspector
```

Use this view to inspect the detected BLE device list and details one device at a time.

1. Open `Bluetooth → SNIFFER → Inspector`.
2. Select the device to inspect.
3. Read the details on the display.
4. Press left to go back, or use [the feature-stop procedure](/en/getting-started/controls#stop-an-active-feature) to leave the active screen.

<Info>
  The displayed name or address may not reliably identify an owner or device type. Some devices automatically rotate their address for privacy.
</Info>

<Info>
  📷 **Images to add:** One BLE Monitor image and one Inspector image, labeled “Detected devices” and “Details”; blur any third-party names or addresses.
</Info>

<Info>
  🎬 **Media to add:** “Open BLE Monitor → stop → open Inspector → select a device → go back,” using only the recorder's own devices.
</Info>

## If no devices are found

1. Move the device closer to C5TAKO™.
2. Confirm that Bluetooth is enabled and the device is advertising.
3. Use [the feature-stop procedure](/en/getting-started/controls#stop-an-active-feature) to close the current scan screen.
4. Turn Bluetooth off and on again on the test device, then retry.
5. If it is still not found, restart C5TAKO™.